
Boiler Installation Aftercare and Maintenance Guide
Last Updated: November 13, 2026
Quick Summary
Boiler installation aftercare and maintenance starts as soon as your new unit is fitted, and the first few weeks matter most. Ask your installer to show you the controls, pressure gauge and isolation valves, and check your documentation for when to book a first service. Keep your certificate, warranty card and service records safe.
- Ask your installer to show you the controls, pressure gauge and isolation valves before they leave.
- Do not ignore a pressure drop; contact your installer rather than topping it up yourself.
- Check your boiler documentation for the recommended timing of a first service, as it varies by make and model.
- A first service usually checks the burner, flue, heat exchanger and system pressure.
- Keep the installation certificate, warranty card, service dates and engineer's contact details together.
Table of Contents
- What Happens After Your New Boiler Is Installed
- New Boiler First Service: When to Book It
- Registering Your Warranty and Keeping Records
- Frequently Asked Questions
What Happens After Your New Boiler Is Installed
Your new boiler is in, but the job is not finished yet, and good boiler installation aftercare and maintenance starts right away. The first few weeks matter more than most homeowners expect.
Most installers will explain how the system works before they leave. Ask them to show you the controls, the pressure gauge and where the isolation valves sit. Keep a note of anything you are unsure about. Our guide to how boiler sizing is calculated explains how your new unit was matched to your home. If you are still weighing up your options, our Worcester Bosch Boiler Installation page sets out the range of Worcester Bosch boilers we install.
Watch out: Do not ignore a pressure drop on the gauge. Low pressure often points to a leak or a fill issue, so contact your installer rather than topping it up yourself.

New Boiler First Service: When to Book It
Check your boiler documentation for the recommended timing of a first service, as it varies by make and model. Booking early can help catch small issues before they become costly repairs.
A first service usually checks the burner, flue, heat exchanger and system pressure. Our page on getting a boiler installation quote in Swindon shows the steps to request one. It also confirms the boiler is running safely and efficiently. Ask the engineer to explain anything they find.
If you want help arranging this, you can request a boiler quote through our online quote tool.
The table below summarises the key points to check after your new boiler is installed.
| Item | Timing | Note |
|---|---|---|
| First service | Check your boiler documentation | Timing varies by make and model |
| Booking | Book early | Helps catch small issues before costly repairs |
| Burner, flue and heat exchanger | Checked at first service | Part of the first service |
| System pressure | Checked at first service | Confirms the boiler runs efficiently |
| Engineer's findings | Ask the engineer | Request an explanation of anything found |
Registering Your Warranty and Keeping Records
Warranty terms differ between manufacturers and installers, so check the terms that came with your boiler. Keep the paperwork somewhere safe and easy to find.
Use this simple checklist:
- Keep the installation certificate and the warranty card
- Note the date of every service
- Save the engineer's name and contact details
- Record any fault and what was done to fix it
Good records make future claims and servicing much easier. Our guide to choosing a reliable boiler installer explains how to check an installer before you rely on your warranty. If you are unsure what your guarantee covers, get in touch with the B&G Jenkins team.
Keeping your new boiler running well starts with the first few months. If you have questions about aftercare, servicing or a new installation, contact B&G Jenkins today and request your boiler quote.
Frequently Asked Questions
What should I check after a new boiler is installed?
Ask the engineer to walk you through the controls, hot water and heating settings, and where the stopcock and filling loop are. Check the pressure gauge reads within the range shown in the manufacturer's guidance, confirm radiators heat evenly, and make sure you have the commissioning paperwork and the Gas Safe certificate. If anything looks unclear, contact B&G Jenkins.
When should a new boiler have its first service?
Most manufacturers advise a first service within the timescale set out in the warranty terms, so check your handover paperwork for the date. Booking that visit with a Gas Safe registered engineer keeps the boiler running efficiently and helps protect your warranty. Keep the service record, as you may need it if a claim is made later.
Do I need to service my new boiler to keep the warranty valid?
Warranty conditions vary between manufacturers, so read the terms that came with your boiler carefully. In many cases a documented annual service by a qualified engineer is a condition of cover. Keep every service invoice and record in one place. If you are unsure what your warranty requires, check the paperwork that came with your boiler.

